News

January 2020
Change In Management

Change of technical management

That´s it: After 25 long and successfull years with IMS the professional life of Rainer Fackert ended with the 31st of December 2019 and he left into his well-deserved retirement. „Saying goodbye is not easy for me. I look back on great hours, days, years and joint projects, which have given me many wonderful experiences […]

January 2020
Climate Neutral EN

IMS is confirmed as a climate neutral company

IMS Messsysteme GmbH is confirmed as a climate neutral company! The climate change is certainly the maximum challenge of our time and especially the main polluters of the largest industrial nations are rightly called up to make their active contribution to achieve the climate protection goals defined in the Kyoto Protocol. As the world market […]

December 2019
ASRA Titel

ASRA – Adaptive control of steel strips in hot rolling mills based on high-precision radar signal processing

This project is funded by the European Regional Development Fund (EFDF).   © European Union NRW is known worldwide for the production of steel. In the frame of the project ASRA, IMS Messsysteme GmbH, SMS Group GmbH, IMST GmbH, Ruhr-Universität Bochum and Fraunhofer FHR cooperate in order to sustainably increase efficiency of steel production lines. [...]
November 2019
Ho Chi Minh City

IMS in Vietnam

By moving into the new premises in the Thanh District, Ho Chi Minh City, IMS Messsysteme GmbH is now increasingly represented in Vietnam. Our local service team will be supported by our new colleague Viet Quoc Mai, whom we cordially welcome. With his extensive knowledge of the commissioning and customer training of complex plant technologies […]

October 2019

IMS Messsysteme GmbH at Blechexpo 2019

From 5th to 8th November, the international trade fair for sheet metal processing takes place in Stuttgart.     Production costs and dimensional accuracy are the most important criteria for successful operation of your slitting and cut-to-length lines. You can increase your competitiveness by shortening throughput times and reducing scrap rates. The quality of your […]

September 2019
IMS Einweihung

Another milestone has been reached

The official inauguration of the new production building took place on 13th September. At the grand festivity, the architect Andreas Muster presented the symbolic key to the management. In order to maintain our level in the future, we not only go with the times, but are ahead of our time. With this forward-looking, strategic orientation, […]

August 2019
IMS Systems Korea

Moving of IMS Systems Korea

Our subsidiary in Korea has moved to new premises. The solemn inauguration took place on the 1st of August. For IMS Systems Korea, this year will be one with the highest incoming orders in the subsidiary’s history. The demand for quality improvement in the rolling mills of the country is increasing. IMS Messsysteme GmbH has […]

June 2019
Stand

IMS Messsysteme GmbH at METEC 2019

Experience the world market leader for measuring systems in the rolling industry at the 10th International Metallurgical Trade Fair with congresses Every four years, experts from all over the world visit the trade fair quartet GIFA, METEC, THERMOPROCESS and NEWCAST in Düsseldorf to learn about the latest technologies and solutions from the entire field of […]

November 2018
CLSU5195

High crowds due to CCS Plate Geometry Measurement!

Many thanks for the interesting discussions and the visit to our booth. Right from the first day, there was a lot of crowds at our booth. Approximately over 500 people were interested in our new Camera Cluster Systems. The interest did not decrease until the last day of the fair, so that several new product […]

October 2018
News Homepage

Measuring Systems for Service Center

Since the successful introduction of more than 4.000 Inline-Measuring Systems worldwide, our systems, guarantee especially in slitting lines the reduction of lead times, scrap ratio and the quality management in your systems. The new technology of our CAMERA-CLUSTER-SYSTEMS (CCS) measure: Geometry (length, width, out of squareness, camber), Thickness, Strip Slit Width, Flatness, Surface Defects, Pinhole, […]

Where I can find the IMS system number?

The IMS system number can be found in your operating manual, as a sticker at the central station. Alternatively, you can also refer to the IMS Visu event page.

Examples of a plant number: C96-12-005, PA103423 oder 200246/108781

Auftragsnr_Betriebshandbuch Auftragsnr_Drehrahmen Auftragsnr_VisuEvents
Operational manual Central station IMS Visu event page M-Server Desktop Background
close
Where I can find the IMS system number?

The IMS system number can be found in your operating manual, as a sticker at the central station. Alternatively, you can also refer to the IMS Visu event page.

Examples of a plant number: C96-12-005, PA103423 oder 200246/108781

Auftragsnr_Betriebshandbuch Auftragsnr_Drehrahmen Auftragsnr_VisuEvents
Operational manual Central station IMS Visu event page M-Server Desktop Background
Schließen